Centrifugal Gravel Slurry Acid Feeding Pump to Suck Mud and Sand

Centrifugal Gravel Slurry Acid Feeding Pump to Suck Mud and Sand

Product Description

1. G(GH) pump is horizontal cantilevered single-casing centrifugal pump.

2. G type pump adopts clamp bands  clamping pump body and the cover of the pump

3. the discharge direction of pump can be oriented in any direction of 360.
4. The wet-parts are made of Ni-hard and high chromium  alloys.
5. Bearing components use cylindrical structure, easy to adjust the gap between the impeller and pump body.

     It can be removed in the way of the whole when maintenance.Bearing adopt oil lubrication.
6. Shaft seal: packing seal, expeller seal,mechanical seal

Pump Models & Curve

       14/12 G—— G

            14—— suction discharge diameter (inch)

            12—— discharge diameter (inch)

             G —— frame form

             G —— gravel pump

      Discharge size: 4 ~ 24 inches(100mm ~ 610mm)

      Flow capacity: up to 12600 m ³ /h(55440gpm)

      Head: up to 92 m(302 foot)

      Max allowable particle size: 380mm

Pump structure

Pump Applications

1.Gravel pumps are designed for continuously handling the most difficult higher abrasive slurries

which contain too big solids to be pumped by a common pump.

2.Dredging, suck gravel in the dredger,  suck gravel in the course of rivers
3.Delivering slurries in mining, explosive sludge in metal smelting
4.Type GH pumps are of high-head ones

Features & Benefits

1. It uses modern CAD design method, and has excellent hydraulic performance, high efficiency, and low wear rate;
2. It has wide runner, good anti-clogging performance, and excellent cavitation performance;
3. It uses expeller and filler combined seal and mechanical seal, ensuring that the slurry doesn’t leak;
4. The reliability design greatly improves mean time between failures (MTBF) of complete machine;
5. It uses thin oil lubrication metric bearing, and rationally sets lubrication and cooling system to ensure that the bearing operates at low temperature;
6. Flow passage components are made of special materials, so they have good wear resistance and corrosive resistance; after special processing, they are used for seawater dusting, and seawater and salt mist electrochemical corrosion conditions;
7. In allowable pressure range, it can be used in series in stages, and allowable maximum working pressure is 3.6Mpa.

Product Pictures

Production Process